Before Using the TX-NR1000/TX-NR5000E

Installing the Batteries

1 To open the battery compartment, press the small hollow and slide off the cover.

2 Insert the three supplied batteries (AA/R6) in accordance with the polarity diagram inside the battery compartment.

3 Put the cover onto the remote controller and slide it shut.

Notes:

The supplied batteries should last for about six months, although this will vary with usage.

If the remote controller doesn’t work reliably, try replacing the batteries.

Don’t mix new and old batteries, or different types of batteries.

If you intend not to use the remote controller for a long time, remove the batteries to prevent possible leakage and corrosion.

Expired batteries should be removed as soon as possible to prevent damage from leakage or corrosion.

Using the Remote Controller

To use the remote controller, point it at the TX-NR1000/TX-NR5000E’s remote control sensor, as shown below. The TX-NR1000/TX-NR5000E’s [STANDBY] indicator flashes while a signal is being received from the remote controller.

Remote control sensor

TX-NR1000/

 

TX-NR5000E

STANDBY indicator

30˚

30˚

Notes:

The remote controller may not work reliably if the TX-NR1000/TX-NR5000E is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights. Keep this in mind when installing the TX-NR1000/TX-NR5000E.

If another remote controller of the same type is used in the same room, or the TX-NR1000/TX-NR5000E is installed close to equipment that uses infrared rays, the remote controller may not work reliably.

Don’t put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries.

The remote controller may not work reliably if the TX-NR1000/TX-NR5000E is installed in a rack behind colored glass doors. Keep this in mind when installing the TX-NR1000/TX-NR5000E.

The remote controller will not work if there’s an obstacle between it and the TX-NR1000/ TX-NR5000E’s remote control sensor.

(RC-558M only) You can set the transmission signal format to infrared (IR), or radio frequency (RF) for use with the optional RF Receiver. This is useful when, for example, the TX-NR1000/TX-NR5000E is installed in a rack or is not in line of sight of the remote controller.

To select AMP mode, press the scroll wheel. “AMP” appears on the display.

9

Page 9
Image 9
Onkyo instruction manual Before Using the TX-NR1000/TX-NR5000E, Installing the Batteries, Using the Remote Controller

TX-NR1000 specifications

The Onkyo TX-NR1000 is a high-performance AV receiver designed for home theater enthusiasts who demand premium sound quality and advanced features. This model is part of Onkyo's esteemed lineup and exemplifies the brand's commitment to providing an engaging audio experience.

One of the standout features of the TX-NR1000 is its support for multiple audio formats. It includes advanced decoding capabilities for Dolby Atmos and DTS:X, allowing users to experience object-based audio that creates a three-dimensional soundstage. This immersive technology places sound in a three-dimensional space, enhancing realism in movies and music.

The receiver boasts a robust amplification system, capable of delivering up to 120 watts per channel. This power ensures that even the most dynamic soundtracks can be reproduced with clarity and volume, making it ideal for both small and large rooms. The TX-NR1000 is engineered with high-current amplification, which means it can handle demanding speaker loads effectively, providing deep bass and crisp highs without distortion.

Another noteworthy characteristic of the TX-NR1000 is its comprehensive connectivity options. It includes multiple HDMI inputs and outputs, supporting 4K video pass-through to ensure that users can enjoy the latest high-resolution content. The receiver also features built-in Wi-Fi and Bluetooth for easy streaming from various devices, enhancing the versatility of the home theater system.

For audiophiles, the TX-NR1000 integrates high-resolution audio playback through formats like DSD, WAV, and FLAC. This capability ensures that listeners can enjoy studio-quality sound from their digital music libraries. Furthermore, the receiver is equipped with Onkyo's unique AccuEQ room calibration technology, which measures the acoustics of the room and optimizes audio performance accordingly, providing a personalized listening experience.

In terms of user interface, the TX-NR1000 is equipped with a user-friendly LCD display and remote control, designed for easy navigation through various settings and features. Its intuitive menus enable users to customize their audio and video preferences effortlessly.

In conclusion, the Onkyo TX-NR1000 stands out as a versatile and powerful AV receiver that combines state-of-the-art sound technologies with practical connectivity options. Whether you are a movie buff or a dedicated music lover, the TX-NR1000 promises an exceptional audio experience that can enhance any home entertainment setup.