Onkyo TX-NR1000 instruction manual Connecting Speakers—Continued, Connecting a Subwoofer

Connecting Speakers—Continued

Connecting a Subwoofer

Use the SUBWOOFER PRE OUT A/B jack to connect a subwoofer with a built-in power amplifier. If your subwoofer does not have a built-in amplifier, connect an amplifier to the SUBWOOFER PRE OUT A/B jack and the subwoofer to the amplifier.

You can connect two subwoofers for different speaker systems. You have to assign a subwoofer to the room in which it will be used (See pages 88, 89).

Connecting Auxiliary Power Amplifier (For Speaker System [A] only)

These jacks are for connecting an auxiliary power amplifier. The PRE OUT terminals on the TX-NR1000/ TX-NR5000E use the mode settings for speaker system [A].

You can use an auxiliary power amplifier to listen at louder volumes than you can with the TX-NR1000/ TX-NR5000E alone. When using a power amplifier, connect each speaker to the power amplifier.

		OPTICAL	COAXIAL	R	L	R	L	IN
				PH
				R	L
	ETHERNET
				R	L	R	L
	PRE OUT A	SURR R	SURR BACK R ASSIGNABLE	FRONT R		CENTER		FRONT L
L	A
R
	B
			FRONT R (BTL)					FRONT L
	PRE
	OUT B
LINE INPUT
	SUB	SUB
	WOOFER	WOOFER
	PRE	PRE
	OUT A	OUT B

Front

to White

L

R

to Red

to Green

Center

TX-NR1000/

TX-NR5000E

PRE OUT A	to Brown
FRONT SURR SURR
BACK	L

L

R

R

to Tan

CENTER

to Blue to Gray

LR

Surround Surround back

R LR L R L

INPUT	INPUT	INPUT	INPUT
R L		R L	R L

Power amplifier

1 2 3 4

1.Front left speaker

2.Front right speaker

3.Center speaker

4.Surround left speaker

5.Surround right speaker

5

7.

6 7

Surround back left speaker Surround back right speaker

26