Onkyo TX-NR1000 Connecting the Power/Basic Operations, Turning on the Power, Other models, Hint

Connecting the Power/Basic Operations

•Before you plug in the TX-NR1000/TX-NR5000E, confirm that all connections have been made properly.

•Turning on the power may cause a momentary power surge, which might interfere with other electrical equipment on the same circuit, such as computers. If this happens, use a wall outlet on a different circuit.

(All models other than USA, Canadian, and Australian models)

The TX-NR1000/TX-NR5000E is shipped with the main power (POWER) switch in the on position ( ON ). When the power cord is plugged in for the first time, the TX-NR1000/TX-NR5000E will automatically enter the standby state and the [STANDBY] indicator will light (same condition after step 2 below on the left coloumn).

STANDBY/ON Input source buttons	STANDBY/ON Input source buttons
STANDBY indicator MASTER VOLUME	STANDBY indicator MASTER VOLUME

STANDBY/ON

MASTER VOLUME

STANDBY/ON

MASTER VOLUME

DISPLAY TAPE 1 TAPE 2 TUNER PHONO C D NET AUDIO

POWER DISPLAY TAPE 1 TAPE 2 TUNER PHONO C D NET AUDIO

DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 VIDEO 6 VIDEO 7 DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 VIDEO 6 VIDEO 7

To wall outlet

POWER

To wall outlet

(USA, Canadian, and Australian models) (Other models)

Turning on the Power

Operating on the TX-NR1000/ TX-NR5000E

1

POWER

ON OFF

STANDBY

Plug the power cord into an AC wall outlet.

(USA, Canadian, and Australian models)

The [STANDBY] indicator will light up.

(Other models)

Press the [POWER] switch to set the TX-NR1000/TX-NR5000E to standby state.

The [STANDBY] indicator will light up.

1			Select an input source.
			Press the input source button.
DISPLAY		TAPE 1	TAPE 2
			*You cannot listen to a source in main
TUNER	PHONO	C D	NET AUDIO room A, and to another source in main
DVD	VIDEO 1	VIDEO 2	VIDEO 3 room B.
VIDEO 4	VIDEO 5	VIDEO 6	VIDEO 7
2			Start playing the device selected.

2

STANDBY/ON

STANDBY

Turn off

Press the [STANDBY/ON] button to turn on the TX-NR1000/ TX-NR5000E.

The display will light up and the [STANDBY] indicator will turn off.

If you press the [STANDBY/ON] button again, the TX-NR1000/TX-NR5000E returns to the standby state.

	When playing a picture device such as a
	DVD player, you need to switch input to
	a monitor such a TV set.
	Some picture-playing devices such as a
	DVD-type game machine may also
	require setting of sound output. Refer to
	the manual of the device connected.
3	Adjust the volume level with the
	[MASTER VOLUME] dial.

Note:

Any components connected via will also be turned on when the remote controller’s [ON] button is pressed.

MASTER VOLUME You can adjust the volume level in the

range from –∞, –81.5 dB to 18.0 dB (Max) (when Relative is selected in the Volume Setup sub-menu).

Hint:

TX-NR1000/TX-NR5000E is a product for users to enjoy home theater, so it is equipped with a wide range of volume levels. Please fine tune the volume level aaccording to your preferences.

50