Onkyo TX-SR707 instruction manual Front & Rear Panels—Continued, gMONITOR OUT

Models: TX-SR707

1 128
Download 128 pages 57.62 Kb
Page 12
Image 12
gMONITOR OUT

Front & Rear Panels—Continued

gMONITOR OUT

These S-Video and composite video jacks should be connected to a video input on your TV or projector.

hHDMI IN 1–5 and OUT

HDMI (High Definition Multimedia Interface) con- nections carry digital audio and digital video.

The HDMI inputs are for connecting components with an HDMI output, such as a DVD player, Blu- ray Disc Player, DVD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “HDMI Input Setup” on page 44. The HDMI output is for connecting a TV or projec- tor with an HDMI input.

iCOMPONENT VIDEO IN 1 and 2

These RCA component video inputs are for con- necting components with a component video out- put, such as a DVD player, DVD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Component Video Setup” on page 45.

jCOMPONENT VIDEO MONITOR OUT

These RCA component video outputs are for con- necting a TV or projector with a component video input.

kFM ANTENNA

This jack is for connecting an FM antenna.

AM ANTENNA

These push terminals are for connecting an AM antenna.

lIR IN

A commercially available IR receiver can be con- nected to the IR IN jack, allowing you to control the AV receiver while you’re in Zone 2, or control it when it’s out of sight, for example, installed in a cabinet.

m12V TRIGGER OUT ZONE 2

This output can be connected to the 12-volt trigger input on a component in Zone 2. When Zone 2 is turned on, a 12-volt trigger signal is output.

nGND screw

This screw is for connecting a turntable’s ground wire.

oPHONO IN

These analog audio inputs are for connecting a turn- table.

pCD IN

These analog audio inputs are for connecting a CD player’s analog audio output.

qTV/TAPE IN/OUT

These analog audio inputs and outputs are for con- necting a TV or recorder with an analog audio input and output (cassette, Mini Disc, etc.).

rGAME IN

Here you can connect a game console, etc. Input jacks include S-Video, composite video, and analog audio.

sCBL/SAT IN

Here you can connect a cable/satellite receiver, set- top box, etc. Input jacks include S-Video, composite video, and analog audio.

tVCR/DVR IN/OUT

Here you can connect a VCR or DVR (digital video recorder). Input and output jacks include S-Video, composite video, and analog audio.

uDVD/BD IN

Here you can connect a DVD/BD player. Input jacks include S-Video, composite video, and analog audio. You can connect a DVD/BD player’s 2-chan- nel analog audio output.

vPRE OUT: FRONT L/R, CENTER, SURR L/R, and SURR BACK L/R

These multichannel analog audio outputs can be connected to the analog audio input on a multichan- nel power amplifier for when you want to use the AV receiver solely as a preamplifier.

wPRE OUT: SUBWOOFER

These analog audio outputs can be connected to a powered subwoofer. You can connect the powered subwoofer with two PREOUT: SUBWOOFER jacks respectively. The same signal is output from each jack.

xZONE 2 LINE OUT L/R

This analog audio output can be connected to a line input on an integrated amplifier in Zone 2. See “Connecting Zone 2” on page 103.

yFRONT L/R, CENTER, SURR L/R, SURR BACK/ZONE 2 L/R, FRONT HIGH L/R, and

FRONT WIDE L/R

These terminal posts are for connecting the front L/R, center, surround L/R, surround back/ zone 2 L/R, front high L/R, and front wide L/R speakers. The FRONT L/R and SURR BACK/ZONE 2 L/R terminal posts can be used with front speakers and surround back speakers respectively, or used to bi- amp the front speakers. See “Bi-amping the Front Speakers” on page 20”.

The SURR BACK/ZONE 2 L/R terminals can be used with surround back speakers respectively, or used to connect the speakers in Zone 2.

See “Connecting Zone 2” on page 103.

zAC INLET

(European, Australian and Asian models)

The supplied power cord is connected here. The other end of the power cord should be connected to a suitable wall outlet.

See pages 17-39 for connection information.

12

Page 12
Image 12
Onkyo TX-SR707 instruction manual Front & Rear Panels—Continued, gMONITOR OUT