Onkyo TX-SR707 Component Video Setup, First Time Setup—Continued, Press the RECEIVER button fol

First Time Setup—Continued

Component Video Setup

If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector. For example, if you connect your DVD/BD player to COMPONENT VIDEO IN 2, you should assign it to the DVD/BD input selector.

Input selector	Default assignment
DVD/BD	IN1
VCR/DVR	- - - - -
CBL/SAT	IN2
GAME	- - - - -
AUX	- - - - -
TV/TAPE	- - - - -
TUNER	- - - - - (Fixed)
CD	- - - - -
PHONO	- - - - -
PORT	- - - - -

1 Press the [RECEIVER] button fol-

lowed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “1. Input/Output Assign”, and then press [ENTER].

The “Input/Output Assign” menu appears.

1. Input/Output Assign

1.Monitor Out

2.HDMI Input

3. Component Video Input

4. Digital Audio Input

3	Use the Up and Down [q]/[w] but-
	tons to select “3. Component
	Video Input”, and then press
	[ENTER].

The “Component Video Input” menu

appears.
1–3.	Component Video Input
DVD/BD	IN1
VCR/DVR	- - - - -
CBL/SAT	IN2
GAME	- - - - -
AUX	- - - - -

4	Use the Up and Down [q]/[w] but-
	tons to select an input selector,

and then use the Left and Right [e]/[r] buttons to select:

IN1: Select if the video component is connected to COMPO-

NENT VIDEO IN 1.

IN2: Select if the video component is connected to COMPO-

NENT VIDEO IN 2.

- - - - -:Select if you are using the

	HDMI OUT, rather than the
	COMPONENT VIDEO
	OUT, for the output from
	composite video, S-Video,
	and component video
	sources.
5	Press the [SETUP] button.
	The setup menu closes.

Notes:

•If you connect an input component (such as UP-A1 series Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector.

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

45