Onkyo TX-SR707 instruction manual Advanced Setup—Continued, Audio Selector, A/V Sync

Advanced Setup—Continued

Audio Selector

You can set priorities of audio output when there are both digital and analog inputs.

Auto: The AV receiver gives priority to analog signals when there is no digital input (default). Analog: The AV receiver always outputs analog signals.

Note:

This setting can be made only for the input source that is assigned as HDMI IN, COAXIAL IN, or OPTICAL IN. If both HDMI (HDMI IN) and digital audio inputs (COAXIAL IN or OPTICAL IN) are assigned, HDMI input will be selected as a priority by setting to “Auto”. To select the digital audio input, see “Digital Audio Input Setup” on page 46.

A/V Sync

See “A/V Sync” of “Source Setup” on page 88.

101