Onkyo TX-SR707 Hardware Setup, Advanced Setup—Continued, Immediate Display, Off: Not displayed

Advanced Setup—Continued

OSD Setup

Immediate Display	On: Displayed (default).
	Off: Not displayed.

This preference determines whether operation details are displayed onscreen when an AV receiver function is adjusted.

Even when “On” is selected, operation details may not be output if the input source is connected to an HDMI IN.

Display Position	Bottom: Bottom of the screen (default).
	Top: Top of the screen.

This preference determines where on the screen operation details are displayed.

TV Format (European, Australian and Asian models)

See “TV Format Setup (European, Australian and Asian models)” on page 48.

Language

See “Selecting the Language used for the onscreen setup menus” on page 41.

. Hardware Setup

This section explains items on the “Hardware Setup” menu.

1 Press the [RECEIVER] button followed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] buttons to select “7. Hardware Setup”, and then press [ENTER].

The “Hardware Setup” menu appears.

7.Hardware Setup

1.Remote ID

2.Tuner

3.HDMI

3	Use the Up and Down [q]/[w] buttons to
	select an item, and then press [ENTER].
	The screen for that item appears.
4	Use the Up and Down [q]/[w] buttons to
	select an item, and use the Left and Right
	[e]/[r] buttons to change it.
	The items are explained below.
5	When you’ve finished, press the
	[SETUP] button.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

94