Oregon Scientific SE212 / SE232 user manual To replace the chest belt battery

EN

To replace the chest belt battery:

1.Locate the battery compartment on the back of the chest belt.

2.Using a coin, as shown above, twist the compartment lid counter-clockwise until it clicks out of place.

3.Set the battery compartment lid aside.

4.With your finger, remove the old battery and set it aside.

5.Insert the new battery with the + side upwards.

6.Replace the battery compartment lid by twisting it clockwise until it is firmly in place.

IMPORTANT

• Non-rechargeable and rechargeable batteries must be disposed of properly. For this purpose, special containers are provided for non-rechargeable and rechargeable battery disposal at communal collection centres.

•Batteries are extremely dangerous when swallowed! Therefore, keep batteries and the article away from infants. If a battery has been swallowed seek immediate medical advice.

•The batteries supplied must not be recharged, reactivated by any other means, dismantled, put into fire or short-circuited.

10

SE212 English R7 OP_OK.p65 10 2006.1.6, 1:53 AM