2.The gym equipment does not seem to work with your chest belt and the digital icon 
is displayed:
•Most gym equipment is compatible with the analog system
. Press and hold the chest belt button for more than 4 seconds to change from digital to analog. Then force a signal search (see “Signal Search” section)
3.Interference from another person's heart rate monitor - their heart rate readings appear on your watch, or the heart rate monitor shows "0":
•Press the chest belt button to get the watch to receive your chest belt signal. Do not press and hold the chest belt button, as it will change the transmission signal from digital to analog.
•Take the chest belt off for 12 seconds to automatically change your User ID. (The watch has 4 User ID's. When the watch receives the chest belt signal it will tell you which User ID it has selected. Only products with a digital coding system have User ID capability.)
4.The signal is jammed - the heart rate reading on your watch is flashing:
•There is too much interference in the environment for your heart rate monitor to function. Move to an area where the heart rate reading stops flashing.
WARNING Signal interference in the environment can be due to electromagnetic disturbances. These may occur near high voltage power lines, traffic lights, overhead lines of electric railways, electric bus lines or trams, televisions, car motors, bike computers, some motor driven exercise equipment, cellular phones or when you walk through electric security gates. Under interference, the heart rate reading may become unstable and inaccurate.
EN
13
SE212 English R7 OP_OK.p65 | 13 | 2006.1.6, 1:53 AM |
