AC IN Hot Key

The AC IN hot key allows direct control of the AC input from anywhere in the menu system.

 

 

AC IN

MAIN--------------------------

1:35:04p

Hot

SUM STATUS SETUP ADV

Key

 

The yellow LED indicator above the AC IN “hot” key has three modes:

Flashing - an AC source is available, but not connected

Continuously On - the AC source is connected and in use (unit stops inverting during this time)

Off - no AC source is present

Multiple AC IN keypresses will call up different AC and charging-related menus..

AC INPUT CONTROL

 

currently:

USE

DROP USE

OK

PRESS ONCE:

The AC INPUT CONTROL screen is called up, allowing the user to connect or disconnect the Inverter to an AC input source.

<USE> enables the Inverter to connect to an AC input source.

<DROP> disconnects the AC input source but will allow it to be reconnected if the “low battery cut-off set point” occurs or the Inverter is overloaded.

<OK> returns to the point in the menu system before the user entered the AC INPUT CONTROL menu cycle.

GEN START CONTROL

 

currently:

 

MAN-OFF

OFF

AUTO

ON

OK

PRESS TWICE:

The GEN START CONTROL screen allows changes to the Automatic Generator Start (AGS) mode, which is used with some models of FX inverter.

NOTE: The AGS mode cannot be used with the OBX-IC2024S-120/60 Inverter.

17

Page 19
Image 19
Outback Power Systems OBX-IC2024S-120/60 owner manual AC in Hot Key