AC Input Operating Voltage Range
Note: This is the recommended AC input voltage range to be supplied to the Inverter. Voltages outside of this range will not be accepted by the Inverter.
80 – 150 Vac (Vac = volts AC)
AC Input Frequency Range
Note: If the AC input source is out of the range noted below, the Inverter will not connect or stay connected.
Maximum AC Input Current
An AC input source connected to the Inverter supplies power for two separate internal AC circuits – the AC transfer switch and the battery charging system. The AC transfer switch transfers the AC input power to the AC loads. The Inverter’s battery charger will “back off” if the total AC
30 Aac (Aac = Amps AC)
Maximum Current For Battery Charger (bulk stage)
AC Max = 14 Aac (Default = 12 Aac)
DC Max = 55 Adc
Maximum AC Output Current
This is the amount of surge current that the Inverter will quickly supply for a split second. Depending on the size of the surge, the Inverter can be overloaded for a minimum time of 5 seconds to a maximum time of 30 minutes.
70 Aac for 1 millisecond
Maximum Overcurrent Protection Ampacity
This rating specifies the proper overcurrent protection ampacity.
•
•Inverters used in fixed installations should use properly sized DC circuit breakers.
•A DC breaker includes both overcurrent protection and disconnect capability.
•OutBack Power Systems recommends Class T fuses for mobile installations where a DC disconnect is not required.
Model | Ampacity | DC Breaker | DC Fuse |
175 Adc | Class |
35
