Outback Power Systems OBX-IC2024S-120/60 owner manual Reading a Status Screen

Reading a Status Screen

STATUS/FX/PAGE1---------------	STATUS/FX/PAGE2---------------	STATUS/FX/PAGE3---------------
choose category	choose category	choose category
MODES METER BATT PG2	PG1 ERROR WARN PG3	PG2 DISCON SELL MAIN

•MODES: not recommended for use with the OBX-IC2024S-120/60 Inverter -- do not select this option

•METER: displays inverter and charger activity, including output and input AC voltage, and AC inverter, charger, and input current

•BATT: displays the battery temperature, voltage and the various set points for the different recharging cycles as well as the time remaining to complete any of those cycles

•PG2: pressing the <PG2> soft key opens the next selection of STATUS screens

•ERROR: various errors and their causes, some external and some internal to the Inverter; an error can shut the unit down

•WARN(ING): various warning situations, some external and some internal to the Inverter; warnings will not shut the unit down

•PG3: Pressing the <PG3> soft key opens the last STATUS screen

•DISCON: lists the reasons the Inverter disconnects from an AC source

•SELL: not used with the OBX-IC2024S-120/60 Inverter -- do not select this option

•MAIN: exits STATUS and returns to the Main menu

26