Status Meter Screens
Pressing the <METER> soft key brings up the first METER screen. | |
choose category: | Pressing the <DOWN> soft key brings up successive METER screens. |
| |
MODES METER BATT | PG2 |
Charge |
| P00 | P00 | P00 | ||||||
inv | 0.0kw | zer | 0.0kw | output |
| 117 vac | input |
| 118 vac | |
chg | 0.0kw | buy | 0.0 kw | voltage |
|
| voltage |
|
|
|
DOWN | STATUS PORT | DOWN | UP | TOP PORT | DOWN | UP | TOP | PORT |
P00 | P00 | P00 | ||||||||
inverter |
| 0.0 aac | charger |
|
| 0.0 aac | input |
| 0.0 aac | |
current |
|
| current |
|
|
| current |
|
|
|
DOWN | UP | TOP PORT | DOWN | UP | TOP | PORT | DOWN | UP | TOP | PORT |
P00 | P00 | |||||||
sell |
| 0.0 aac | FX firmware |
| 61 | end of meter menu | ||
current |
|
| revision |
|
|
|
|
|
DOWN | UP | TOP PORT | DOWN | UP | TOP | PORT | UP | TOP STATUS |
METER Screens
The METER screens displays current, voltage and wattage measurements, Inverter status, and the version of Inverter software, in this order:
•initial screen, beginning with charge/invert/float/etc:
•output voltage: available AC voltage at the Inverter’s AC output
•input voltage: available AC voltage at the Inverter’s AC input, from utility or generator
•inverter current: AC amperage being drawn by loads on AC output when Inverter is ON and no AC source is connected
•charger current: AC amperage used by the Inverter’s charger
•input current: AC amperage drawn by the Inverter’s AC input (combination of charging and loads)
•sell current: not active in this model
•FX firmware: current Inverter software version
The METER values cannot be changed in the STATUS screens.
Push <TOP> to | Push <STATUS> | |
return to the first | to return to the | |
METER screen. | “choose category” | |
|
| STATUS screen. |
|
| |
The first | METER screen shows what the | |
Inverter is doing at the time this screen is | ||
viewed. The list below shows the possible | ||
activities and what they mean. | ||
|
|
|
Activity | Definition |
|
Off | Inverter turned off; no AC source | |
Search | Inverter on but asleep; no load demand | |
On | Inverting from batteries; no AC source | |
Charge | Charging batteries from AC source | |
Silent | Using AC source, charging complete | |
Float | Maintaining batteries once full | |
EQ | Running controlled battery overcharge | |
Chr Off | Using AC source; charger turned off | |
|
|
|
27