SETUP------------------------------

choose category:

FXMATE

SETUP/MATE/PAGE1--------------

mate code rev

4.1.6

choose category

 

CLOCK CNT GLOW

PG2

SETUP/MATE/PAGE2--------------

choose category:

PG1 SUMRY COMM MAIN

SETUP/MATE/COMM--------------

choose category:

BACK REPOLL PC DEBUG

Searching for Devices

HUB Found

Port Assignment

 

1> FX

2> FX

3> CC

4> CC

5>

6>

7>

8>

9>

10>

2M>

 

Press the MATE soft key to enter the series of menus for MATE setup and display.

From the SETUP/MATE/PAGE1 screen, press the <PG2> soft key.

From the SETUP/MATE/PAGE2 screen, press the <COMM> soft key.

<REPOLL> forces the MATE to “rediscover” all the OutBack devices it is connected to. This must be used any time an OutBack device is moved or added to a HUB.

<PC> and <DEBUG> are not normally used with the

OBXIC2024S-120/60 Inverter.

The MATE has found the HUB and will automatically go to the Port Assignment screen.

The Port Assignment screen will show which ports are occupied by an Inverter (represented by the initials “FX”). The Port assignment screen always shows 11 ports, even if the HUB has only 4 or 5.

After displaying the devices connected to each Port, the MATE returns to the choose category screen on its own.

24

Page 26
Image 26
Outback Power Systems OBX-IC2024S-120/60 owner manual PG1 Sumry Comm Main, Back Repoll PC Debug