SETUP/MATE/SUM/TYPE---------
summary None screen type
BACK INC DEC
SETUP/MATE/SUM/TYPE---------
summary |
| FX Only |
screen type |
| |
BACK | INC | DEC |
Press either the <INC> and <DEC> soft keys to change the SUMMARY screen to one of the following items:
None — disables the SUMMARY screen from automatically opening; the SUMMARY screen can still be accessed via the <SUM> soft key on the MAIN screen.
FX
Continuing to press either the <INC> or <DEC> soft keys will bring up other summary screen options.
NOTE: Other options in this menu are not normally used with the
summary |
| FX Only |
screen type |
| |
BACK | INC | DEC |
SETUP/MATE/SUMMARY----------
summary control
BACK TYPE DELAY ROLL
summary control
BACK TYPE DELAY ROLL
summary control
BACK TYPE DELAY ROLL
Press the <BACK> soft key to return to the Summary Control screen.
The <DELAY> soft key sets the time delay for the SUMMARY screen to appear. (See below and the next page.)
The <ROLL> soft key is not normally used with the OBX‑IC2024S‑120/60 Inverter.
After selecting FX Only and exiting the SETUP/MATE/SUM/ TYPE screen, the SUMMARY screen will automatically appear whenever the MATE has been inactive for the <DELAY> set point (very much like a screensaver on a computer monitor).
If “None” was selected, the MATE continues to display the last active screen viewed; if you press the <SUM> soft key on the MAIN menu when “None” is chosen, the FX SUMMARY screen appears.
To change the delay time:
In the SETUP/MATE/SUMMARY screen, press the <DELAY> soft key; this will take you to sum screen delay time.
22
