Palsonic 76WSHD owner manual External Equipment connections, To connect AV input terminals

3.4 External Equipment connections

3.4.1 To connect AV input terminals

(Please refer to the owner's manual of the equipment to be connected as well.)

You can connect video equipments such as a VTR and video camera to this TV and enjoy the high quality picture and sound.

If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal (special S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (phono type).

To video output

Video camera, etc.

			To audio output
		Yellow (video)
VTR without		White (audio L/MONO)		VTR with
		Red (audio R)
S-VIDEO terminal				S-VIDEO terminal
	Aerial output		Aerial output
To audio	To video			To S-VIDEO
outputs	outputs	THE SET'S REAR		output terminal	To audio
	TO ANT IN
					outputs

To select the input, press AV/TV button to display the signal source selection menu and press the CH or CH button to select the corresponding input mode ( VIDEO 1 or VIDEO 2 or VIDEO 3) and press VOL button to confirm.

Note on the S-VIDEO terminal

The S-VIDEO input terminal has priority over the AV1, AV2 VIDEO terminals on the rear and the AV3 VIDEO terminal on the side. To use equipment connected to the video terminals, disconnect any plug from the S-VIDEO terminal.