4. Switching on/off

1)

Press the main POWER SWITCH (1) the

(2)

 

 

 

 

 

 

 

red power indicator lights up, the set is in

 

 

 

 

2)

standby mode.

 

 

 

 

Press the POWER button (2) on the remote

 

 

 

 

 

controller to turn on the set, and the power

 

 

 

 

 

indicator turns to yellow. Or you can directly

 

 

 

 

 

press CH+ / CH- button on the set to turn

 

 

 

 

3)

on the set.

 

 

 

 

To turn off the set completely, press the

 

 

 

 

 

main POWER SWITCH (1).

 

 

 

 

4)

(1)

To turn off the set temporarily, press the

 

 

 

 

POWER button (2) the set is in standby mode, the indicator turns to red.

5)When the remote operation is received by the set, the TIMER indicator (green) on the set's front will glitter to inform the user.

!The buttons in this manual refer to the ones on the remote controller if without special indication.

5. Signal source selection

1)Press the AV/TV button (1) to display signal source selection menu.

2)Press the CH or CH button (2) to select one of RF / VIDEO1 VIDEO2/

3)VIDEO3 / YCbCr / HDTV-XGA / YPbPr. Press VOL or VOL button (3) to confirm your choice.

(3)

 

 

 

 

(2)

 

 

 

 

 

 

 

 

 

(2)

 

 

 

 

 

 

(1)

 

 

 

 

 

 

 

 

 

 

RF VIDEO1 VIDEO2 VIDEO3 YCbCr

HDTV-XGA YPbPr

Page 14
Image 14
Palsonic 76WSHD owner manual Switching on/off, Main Power Switch