Palsonic 76WSHD owner manual Using the CH or CH buttons, Using the Previous channel button

8.2 Using the CH or CH buttons

Press CH(1) to select higher position numbers; CH(2) to select lower ones.

8.3 Using the PREVIOUS channel button ()

(3)	28
(1)
(2)

Press the button on the remote controller can swap the current viewed channel with the previous one.

!Note: Pressing the button can also switch between programs from RF, AV1, AV2, AV3, DVD IN, HDTV IN (but this button can not be used to switch between YPbPr and XGA).

8.4Using the PREVIEW button

Press PREVIEW button to start scanning from the current channel to higher channel, 16 sub- pictures will fill up the whole screen one by one. You can press one of P.SCAN, PHOTO, DYNAMIC, STILL, 0-9, -/-- , buttons on the remote controller to select a corresponding channel program.

The menu of 16 picture

These buttons' arrangement is in accordance with the arrangement of the program

(4)menu, each button represents the corresponding program.

Press the DYNAMIC button, the corresponding program is displayed on the main screen.

If there are more than 16 programs, a new series of programs from 17th program will be displayed in turn, overwriting the previous screen until all the programs be displayed, and then recycle.