13. Signal source selection
If you previously watch programs in RF mode and now you want to watch HDTV programs, please first press the AV/TV button (4) call up the signal source selection menu, press the CH 
or CH 
button (3) to select 
or VOL 
button (2) to confirm your choice. Later you can directly press HD/TV button (5) to switch between the previous RF mode and HDTV mode.
(5)
|
|
|
|
| RF |
|
|
|
|
| VIDEO1 |
(3) |
|
|
|
| VIDEO2 |
|
|
|
| VIDEO3 | |
(2) |
|
|
| (2) | |
|
|
| YCbCr | ||
|
| ||||
(1) | (3) | ||||
YPbPr | |||||
| (4) |
| |||
If your selected terminal has no input signal source, the screen will display "NO SIGNAL".
At this time please press MENU button (1) to call up HDTV SOURCE menu, press CH 
or CH
button (3) to select the other terminal which has signal input and press MENU button (1) to confirm. Then you can enjoy the program
NO SIGNAL
HDTV SOURCE 
XGA INPUT 
YPbPr INPUT
If both the XGA and YPbPr have signal source and you want to switch from the current signal source to the other signal source (for example, you are watching XGA program and then you want to watch program from YPbPr), please press MENU button (1) to call up the main menu, press CH 
or CH 
button (3) to select 
( XGA 
YPbPr), then press MENU button (1) the signal source is switched over.
Moreover, there is only one group of audio input terminals in HDTV mode, therefore you can only select to connect either XGA or YPbPr audio terminals.
