7.4.2 FINE TUNE
1) | Press the number buttons (4) or |
|
|
|
|
|
| (4) | ||
| CH | button (3) to select the | (3) |
|
| |||||
| (1) | |||||||||
| channel you want to | |||||||||
2) | (2) |
|
|
|
| (2) | ||||
Enter into the PRESET menu, |
|
|
|
| ||||||
| (3) | |||||||||
| press CH | button (3) to select |
| |||||||
|
|
|
|
|
|
|
| |||
Fine tune, then press and hold the VOL
or VOL 
button (2) to begin
!Note: if some channel’s colour or sound is abnormal, it may be that the setting of the colour or the sound system is wrong, please do adjustment according to "8.6 The setting of colour and sound system" to set the proper colour and sound system.
7.5 VCR
When receiving VCR programs, there may occur jump of the picture or bend of upper picture. You can solve this problem by activating VCR function. Please do the following steps:
Enter into the PRESET menu, press CH
or CH
button to select VCR item, and press
VOL or VOL
button to set VCR 
(ON).
If you do not meet this problem, or the signal source is not from VCR, please shut off this function.
7.6 The setting of colour and sound system
7.6.1 Use OSD button
(1) |
| PAL 6.5MHz |
| 100Hz MOVING | |
|
Press OSD button (1), the screen will display position number, colour and sound system. scan mode etc. Check whether the colour and sound system is correct.
