Palsonic 76WSHD owner manual Menu operation in video mode, Colour system setting

Menu operation in video mode

You can connect video equipments such as a VCD, VTR to this TV and enjoy the program playbacked by the video equipment. Press the AV/TV button to display the signal source selection menu and then select video mode.

		Colour system setting
(3)		As same as 7.6.2 "The setting of
(2)	(2)	colour system"

(1)(3)

(4)

VCR

Normally when watching VCR (video cassette recorder) program, the picture is normal, selecting VCR X (OFF) is OK. But since some cassette's quality is poor, and non-synchronous phenomenon may occur, the picture's top is distorted and is abnormal. At this time, please set VCR (ON) , and the picture will be normal. Please do the following steps:

Press the MENU button (1) to display the main menu, press VOL or VOL button (2) or

select PRESET menu, press CH button (3) to select VCR, then press VOL or VOL button (2) to set VCR (ON).

!Note: when the signal source is not from VCR (that is, not from video cassette recorder), please set VCR X (OFF).

VOLUME REDUCE

When the sound is too loud and coarse and in distortion, you can activate VOLUME REDUCE function to reduce the sound.

Enter into the PRESET menu, press CHor CHbutton (3) to select VOL REDUCE, press VOL or VOL button (2) to set VOL REDUCE (ON), otherwise set VOL REDUCE X (OFF).

!Note: as regards to the other menu items' adjustment, please refer to the instructions described in the previous pages.