Power

Problem

Check points

“ERROR OCCURRED.

≥ The unit has automatically detected an error. Restart the unit

PLEASE TURN UNIT OFF,

by turning off and on.

THEN TURN ON AGAIN.”

≥ The unit will be turned off in about 1 minute if the unit is not

is displayed.

turned off and on.

 

≥ Repair is needed if it is repeatedly displayed even if it is

 

restarted. Detach the power connected, and consult the

 

dealer who you purchased this unit from. Do not attempt to

 

repair the unit by yourself.

 

 

 

Indication

Problem

Check points

Function display

≥ [CARD&BATTERY] or [OTHER DISPLAY] of the

(Remaining Display,

[SW & DISP SETUP] is [OFF]. (l 102, 103)

Counter Display, etc.) is

≥ Press the COUNTER button to switch the counter display.

not displayed.

(l 51)

 

 

 

Recording

Problem

Check points

The unit arbitrarily stops

≥ Use an SD card that can be used for motion picture recording.

recording.

(l 16)

 

≥ The recordable time may have shortened due to the

 

deterioration of the data writing speed or repeated recording

 

and deletion. Using the unit, format the SD card. (l 28)

 

 

Auto Focus function does

≥ Switch to Intelligent Auto Mode.

not work.

≥ If you are trying to record a scene which is hard to bring into

 

focus in Auto Focus Mode, use the Manual Focus Mode to

 

adjust the focus. (l 34, 38)

 

 

Color or brightness of the

≥ Color or brightness of the image may change, or you may see

image changes, or you

horizontal bars in the image when the object is recorded

may see horizontal bars in

under fluorescent light, mercury light or sodium light, etc., but

the image.

this is not a malfunction.

The LCD monitor flickers

≥ Perform following operation.

jRecord in the Intelligent Auto Mode

indoors.

jSet the shutter speed to 1/60 in areas where the power

 

supply frequency is 60 Hz, or 1/100 in areas of 50 Hz.

 

 

- 115 -