Using the [Eye-Fi Power Management] function

Set the power source for Eye-Fi transfers.

Change the mode to .

Select the menu.

MENU : [SW & DISP SETUP] # [Eye-Fi Power Management] # desired settings

[BOTH]: Eye-Fi transfers are possible with either the AC adaptor or the battery.

[AC]: Eye-Fi transfers are possible only when the AC adaptor is in use.

The Eye-Fi menu only appears when an Eye-Fi card is used.

The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due to changes to the card specification etc.

Update the firmware of the Eye-Fi card to the latest one using the software supplied with the Eye-Fi card before use.

When the endless memory function of the Eye-Fi card is set to on, the files transferred from the card may be deleted automatically.

The Eye-Fi card may heat up as a result of the files being transferred. Note that the use of an Eye-Fi card accelerates the battery drain, so we recommend you use the card in Playback Mode.

The Eye-Fi setting can be checked while pausing the recording.

Displayed icons

 

Eye-Fi setting

 

 

 

 

 

 

 

 

 

 

 

 

 

[Eye-Fi TRANSFER] is set to [OFF]

 

 

 

 

 

 

 

 

(White)/

*(White)

[Eye-Fi TRANSFER] is set to [ON] and the unit is not

 

 

 

 

 

 

connected to the network.

 

 

 

 

 

 

 

 

(Green)/

*(Green)

[Eye-Fi TRANSFER] is set to [ON] and the unit is

 

 

 

 

 

 

connected to the network or is transferring a file.

/

*

 

[Eye-Fi TRANSFER] is set to [ON] and a file transfer

 

 

 

 

 

 

has been interrupted.

 

 

 

 

 

 

 

 

 

 

 

 

 

* These are displayed only when [Eye-Fi DIRECT] is used.

If the Eye-Fi card is removed and then reinserted into the unit, set functions related to Eye-Fi again from the menu.

When using the Eye-Fi card, please be sure to unlock the write-protect switch. (l 16)

Before deleting the files, please confirm they have been transferred to your PC and uploaded to the sharing site.

Do not use the Eye-Fi card in locations where the use of wireless devices is forbidden, such as inside aircraft etc.

Depending on network conditions, the transfer may take some time. Also, if network conditions deteriorate, the transfer may be suspended.

- 88 -