Setting the Time Code
Time code will display the recording time in hours, minutes, seconds, and frames.
TC 00:00:00:00 (hour : minute : second : frame [NDF])
TC 00:00:00.00 (hour : minute : second . frame [DF])
≥The frame (Number of frames counted every second) will vary depending on the [REC FORMAT] setting. (l 94)
Recording format | Frame | |
[PS 1080/60p], [PH 1080/60i], [PH 1080/30p], [HA 1080/60i], | 0 to 29 | |
[HE 1080/60i], [PM 720/60p], [SA 480/60i], [CS 480/60i] | ||
| ||
|
| |
[PH 1080/24p] | 0 to 23 | |
|
|
[TC MODE]
Select the compensation mode for the time code.
MENU : [RECORD SETUP] # [TC MODE] # desired setting
[DF]: | Time code is compensated in accordance with the actual time. It is |
| mainly used for broadcasting such as TV programs. |
[NDF]: | It will not compensate the time code. (There will be a difference from |
| the actual time) |
|
|
|
|
≥It is automatically set to [NDF] when the [REC FORMAT] is set to [PH 1080/24p] or the Interval Recording is used.
[TCG]
Sets the way the time code will move.
MENU : [RECORD SETUP] # [TCG] # desired setting
[FREE RUN]*: | It will constantly move. |
[REC RUN]:It will move only when recording.
*An error may occur when the playback mode is switched when the [REC FORMAT] is set to [PH 1080/24p].
≥It is automatically set to [FREE RUN] when it is set to
≥The time code will reset when the
- 52 -