∫Using an external microphone or audio equipment
≥Set [MIC SETUP] to [2ch]. (l 45)
1 Connect an external microphone or audio equipment to AUDIO INPUT1, 2 terminals (XLR 3 pin). (l 9)
2 Use INPUT1, 2 (LINE/MIC) switches to switch the connected audio input signal.
LINE: audio equipment is connected
Input level is 0 dBu.
MIC: an external microphone is connected
Input level is
≥When [EXT. MIC GAIN1] or [EXT. MIC GAIN2] is set to
3 (When using the phantom microphone (which requires
+48 V power supply))
AAUDIO INPUT2 terminal (XLR 3 pin)
BAUDIO INPUT1 terminal (XLR 3 pin)
Set the INPUT1, 2 (+48V) switches to ON.
ON: +48 V power supply to audio input terminals 1, 2 (XLR 3 pin).
OFF: No power supply for audio input terminals 1, 2 (XLR 3 pin).
4 Use the CH1 switch to select the input signal to be recorded to audio channel 1.
INT(L): Audio from the
INPUT1: Audio from a device connected to audio input terminal 1 (XLR 3 pin) is recorded to channel 1.
INPUT2: Audio from a device connected to audio input terminal 2 (XLR 3 pin) is recorded to channel 1.
5 Use the CH2 switch to select the input signal to be recorded to audio channel 2.
INT(R): Audio from the
INPUT2: Audio from a device connected to audio input terminal 2 (XLR 3 pin) is recorded to channel 2.
∫Table of audio input patterns
Switch setting | Channel or terminal used for signal input | |||
CH1 switch | CH2 switch | Audio channel 1 | Audio channel 2 | |
INT(L) | INT(R) | Internal microphone Lch | Internal microphone Rch | |
|
|
| ||
INPUT2 | Internal microphone Lch | AUDIO INPUT2 terminal | ||
| ||||
|
|
|
| |
INPUT1 | INT(R) | AUDIO INPUT1 terminal | Internal microphone Rch | |
|
|
| ||
INPUT2 | AUDIO INPUT1 terminal | AUDIO INPUT2 terminal | ||
| ||||
|
|
|
| |
INPUT2 | INT(R) | AUDIO INPUT2 terminal | Internal microphone Rch | |
|
|
| ||
INPUT2 | AUDIO INPUT2 terminal | AUDIO INPUT2 terminal | ||
| ||||
|
|
|
| |
- 47 -