≥When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded (particularly when recording in [HE] mode), mosaic-type noise may appear at playback.

[2 SLOTS FUNC.]

You can set the auto switch recording and backup recording.

≥Insert SD cards to card slot 1 and card slot 2.

[OFF]:

Cancel the setting.

[AUTO SW]:

Set the auto switch recording

[BACKUP]:

Set the backup recording

∫Auto switch recording

This is simple Relay Recording. It is possible to continuously record on the SD card in the other card slot even when the available capacity of the SD card runs out during the recording. Note that there will be a momentary pause in the sound when recording media is switched.

≥ is displayed on the media to record the video. will disappear when the recording media is switched and the auto switch recording is started.

≥The number of recording media switches in auto switch recording is limited to one.

∫Backup recording

Same motion picture can be recorded on two SD cards.

≥ is displayed on the cards the motion pictures is recorded.

≥When [SD CARD 1] is selected as the destination of recording the motion pictures, backup will be recorded on [SD CARD 2].

≥It is recommended to record on the SD cards that are same speed class and same capacity when performing the backup recording.

(Auto switch recording)

≥Destination to record still pictures will be switched to other SD card after performing the auto

switch recording. (Backup recording)

≥Backup recording will not be performed for still pictures.

≥When performing backup recording, even in the case where an error has occurred in one of the SD cards and recording has stopped, recording can be continued using the other SD card.

≥When one of the media reaches its maximum recording time, the backup recording stops. If free space on the other media is still available, the recording will continue.

- 95 -