To remove the external microphone, etc., from the audio input terminals 1, 2 (XLR 3 pin)

Remove while pushing on the PUSH section of the audio

 

input terminals 1, 2 (XLR 3 pin).

ヱヶヴラ

≥Set the input signal to built-in microphone by switching the

CH1, CH2 switches to INT (L) or INT (R) after removing the external microphone. Audio will not be recorded when motion picture is recorded without switching.

A PUSH section

≥Set INPUT1, 2 (+48V) switches to OFF if you connect

equipment not compatible with +48 V. You can damage this unit or such equipment if you leave the setting at ON.

≥This unit is turned off when a problem occurs with the +48 V power supply.

≥The battery will discharge faster if you use a phantom microphone.

- 48 -