Editing
Using the Eye-Fi card
By using an Eye-Fi card (commercially-available), you can record motion pictures and still pictures on the card, and save them on a PC or upload them on a file-sharing website via a wireless network.
≥The functions of the Eye-Fi card (including wireless transmission) are not guaranteed to work on this product. In the case of a malfunction of the card, please contact the card manufacturer.
≥To use the Eye-Fi transfer feature, a broadband wireless LAN environment is required.
≥To use the Eye-Fi card, permission from the national or regional government is required. Do not use if you have not obtained permission. If you are unsure as to whether use is permitted, please check with the card manufacturer.
≥To prevent the interception of communications, misuses, identity thefts, etc., we strongly recommend you configure the appropriate security settings (encryption settings). For details, refer to the manuals of your Eye-Fi card and access point.
≥Install the software supplied with the Eye-Fi card in advance on your PC, and configure the Eye-Fi settings. (For settings methods etc., please read the card operating instructions or consult the card manufacturer)
≥Insert an Eye-Fi card (commercially available) into card slot 2 of the unit.
≥(When using in the Motion Picture Recording Mode or Still Picture Recording Mode)
Set the [SD CARD 2] to be used as the recording media. (l 29) (When using in the Playback Mode)
Select the play mode select icon from the thumbnail screen, and set the media to [SD CARD 2]. (l 65)
Select the menu.
MENU : [SW & DISP SETUP] # [Eye-Fi TRANSFER] # [ON]
≥When [Eye-Fi TRANSFER] is set to [ON], the transferable files will be transferred automatically.
≥To cancel the transferring of a file, turn off the unit or set [Eye-Fi TRANSFER] to [OFF].
≥The setting at the time of purchase is [OFF]. Every time the Eye-Fi card is removed from the unit, this setting is set to [OFF].
≥Eye-Fi transfers are not available during motion picture recording.
≥You can check the file transfer status on the thumbnail screen.
File has been transferred
File waiting for transfer
File cannot be transferred
