[TC PRESET]

You can set the initial time code.

1 Select the menu.

MENU : [RECORD SETUP] # [TC PRESET]

2 Touch the item to set and change with / .

It will be set to 00h00m00s00f when the RESET button is pressed.

“h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.

3 Touch [ENTER].

Touch [EXIT] to complete the setting.

This unit will adjust the time code in accordance with the frame rate of the recording format.

(l 94) Therefore, it may not be continuous from the previous final time code when the recording format is changed.

Set the frame to [00] or value that is multiple of 4 when the [REC FORMAT] is set to [PH 1080/ 24p]. The time code that is recorded will shift when other values are set.

Setting the User Information

Eight digit hexadecimal alphanumeric can be entered and displayed as a memo information such as dates, control numbers, etc., into the User Information.

UB 00 00 00 00

[UB PRESET]

You can set the User Information.

1 Select the menu.

MENU : [RECORD SETUP] # [UB PRESET]

2 Touch the item to set and change with / .

You can use numbers from 0 to 9 and letters from A to F.

It will be set to 00 00 00 00 when the RESET button is pressed.

3 Touch [ENTER].

Touch [EXIT] to complete the setting.

- 53 -