Zebra

ZEBRA button

It will switch between the zebra display and the marker display every time the button is pressed. Zebra 1 # Zebra 2* # Marker* # setting canceled

* It is not displayed when the [ZEBRA DETECT 2]/[MARKER] is set to [OFF]. (l 101)

Zebra display:

Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern).

Marker display:

Displays the luminance level of the center of the screen (luminance display frame) in %.

It makes the adjustment of the brightness of the object easier, by checking the luminance level of the object, when recording same object in different surroundings.

Marker display is displayed between 0% and 99%. It will be displayed as 99% when it is over 99%.

You can record an image with little white saturation if you manually adjust the shutter speed or brightness. (l 42, 44)

The zebra pattern does not appear on the images actually recorded.

It is also possible to adjust the level of the zebra pattern to be displayed. (l 100, 101)

Color Bar Screen

BARS button

Press the BARS button to output a color bar screen to a television or monitor so you can adjust them.

To cancel, press the BARS button again.

It will be canceled when the unit is turned off.

While the color bar is displayed, a test tone will be output from the headphone terminal, HDMI terminal and AV multi terminal. (The test tone that is output will be 1 kHz.) It will not be output from the speaker of this unit.

It is possible to record the color bar screen.

It is not possible to display/hide the color bar during recording.

- 62 -