Others

Problem

Check points

If the SD card is inserted in ≥ If the SD card is formatted on a PC, it may not be recognized

this unit, it is not

by this unit. Use this unit to format SD cards. (l 28)

recognized.

 

The wireless remote

≥ [REMOTE CONTROL] of the [OTHER FUNCTION] is [OFF].

control does not function.

(l 25)

≥The button-type battery of the wireless remote control may be run out. Replace it with a new button-type battery. (l 25)

∫If scenes do not change smoothly when played back on another device

The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit.

≥Just how smoothly the scenes will be played back depends on the playback unit. Depending on the unit used, the images may stop moving and become still for a moment even when none of the following conditions are applicable.

≥A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every 4 GB of data when played back with another device.

Principal reasons for not playing back smoothly

≥The recording format [PS] was switched to another recording format when a scene was recorded

≥When the scenes were recorded on different dates

≥When scenes lasting under 3 seconds have been recorded

≥When PRE-REC was used for recording

≥When deleting scenes

≥When scenes recorded more than 99 scenes on the same date

- 117 -