Adjusting the audio input level

∫Adjusting the input level of the built-in microphone (5.1 ch)

≥Set the [MIC SETUP] to anything other than [2ch]. (l 45)

1 Select the menu.

MENU : [RECORD SETUP] # [5.1ch MIC LEVEL] # desired setting

[AUTO]:

ALC is activated, and the recording level is adjusted automatically.

 

 

[SET]/[SETr ]: The desired recording level can be set.

2 (When [SET]/[SETr ] is selected)

Touch / to adjust the microphone input level.

≥Touching allows you to set ALC to on/off. When ALC is activated, the icon is surrounded by yellow and the amount of sound distortion can be reduced. When ALC is deactivated, natural recording can be performed.

≥Adjust the microphone input level so that the last

2 bars of the gain value are not red. (Otherwise, the sound is distorted.) Select a lower setting for microphone input level.

3 Touch [ENTER] to set the microphone input level and then touch [EXIT].

≥ is displayed on the recording screen when the ALC is turned on.

ACenter B Front left C Back left D Front right E Back right

F Microphone input level

≥When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate.

≥You cannot record with the audio completely muted.

- 49 -