[WIND NOISE CANCELER]

[ON]/[OFF]

This will reduce the wind noise coming into the built-in microphones while maintaining the realism.

≥Set the [MIC SETUP] to anything other than [2ch]. (l 45)

≥You may not see the full effect depending on the recording conditions.

[MIC SETUP]

[SURROUND]/[ZOOM MIC]/[FOCUS MIC]/[2ch]

Recording setting of the built-in microphone can be adjusted. (l 45)

[5.1ch MIC LEVEL]

[AUTO]/[SET]/[SETr ]

When recording, the input level from the built-in microphones can be adjusted. (l 49)

[BASS SETTING]

Change the lower setting of the built-in microphone (5.1 ch) according to your choice.

≥Set the [MIC SETUP] to [SURROUND] or [ZOOM MIC]. (l 45) [0dB]/[+3dB]/[+6dB]/[LOWCUT]

≥Normally set to [0dB].

≥Select [+3dB] or [+6dB] to get strong power feeling at bass level.

[2ch MIC ALC]

[ON]/[OFF]

≥Set [MIC SETUP] to [2ch]. (l 45)

Distortion of the sound can be reduced when the built-in microphone (2 ch) or external microphone

is used by setting to [ON]. ( is displayed on the recording screen) It will record with natural sound when set to [OFF].

≥Adjust the audio control knobs (CH1, CH2) to adjust the audio input level.

[EXT. MIC GAIN1]

[-50dB]/[-60dB]

Sets the input level of the external microphone connected to the audio input terminal 1 (XLR 3 pin).

[EXT. MIC GAIN2]

[-50dB]/[-60dB]

Sets the input level of the external microphone connected to the audio input terminal 2 (XLR 3 pin).

- 99 -