Panasonic AG-DVX100A manual INPUT1, INPUT2

Models: AG-DVX100A

1 72
Download 72 pages 17.73 Kb
Page 15
Image 15

Parts and their functions

f g h i

k m

e j l d

ENGLISH

dOPEN button

Press the OPEN button in the direction of the arrow to open the LCD monitor e.

When the LCD monitor is opened, the image on the viewfinder switches to the LCD monitor.

The image can be switched using the EVF MODE item on the setting menu DISPLAY SETUP screen. (See page 48)

OPEN

eLCD monitor

fInternal speaker

gRESET button

If the camera recorder cannot be operated even though its power is on or some other form of trouble has occurred, use a pointed object to press the RESET button. This will reset the system microcomputer.

Even after resetting has been initiated, the entered setting menu values and memory contents will not be erased.

Refrain from pressing the RESET button when the camera recorder is operating properly.

hSHUTTER button

Press this button to change the shutter speed.

After pressing this button, press the SPEED SEL button i to select the shutter speed. (See page 29)

This button cannot be operated in the slow shutter mode.

iSPEED SEL button

After pressing the SHUTTER button h or when the slow shutter mode is established, press this button to select the shutter speed. (See page 29)

jCH1 SELECT switch

This switch is used to select the input signals which are to be recorded on the audio channel 1 track.

INT (L):

Audio signals of the left (L) channel of the internal microphone

INPUT1:

Audio signals which are input to the INPUT

1connector

INPUT2:

Audio signals which are input to the INPUT

2connector

kCH2 SELECT switch

This switch is used to select the input signals which are to be recorded on the audio channel 2 track.

INT (R):

Audio signals of the right (R) channel of the internal microphone

INPUT2:

Audio signals which are input to the INPUT 2 connector

lINPUT 1 switch (MIC POWER +48 V)

When this switch is set to ON, +48 V power (power supply for the phantom mic) is supplied to the INPUT 1 connector.

mINPUT 2 switch (MIC POWER +48 V)

When this switch is set to ON, +48 V power (power supply for the phantom mic) is supplied to the INPUT 2 connector.

15 (E)

Page 15
Image 15
Panasonic AG-DVX100A manual INPUT1, INPUT2