Panasonic AG-DVX100A manual SW Mode screen

Setting menus

SW MODE screen

Item/	Description of settings
(display mode)
MID GAIN	For setting the gain value which is to be
(Camera)	allocated to the M position of the GAIN
	switch.
	0 dB, 3 dB, 6 dB, 9 dB, 12 dB
HIGH GAIN	For setting the gain value which is to be
(Camera)	allocated to the H position of the GAIN
	switch.
	0 dB, 3 dB, 6 dB, 9 dB, 12 dB
ATW	For setting the ATW (Auto Tracking White)
(Camera)	function which is to be allocated to the
	WHITE BAL switch.
	OFF:
	The ATW function is not activated.
	However, if it has been set in the AUTO
	button or USER button, it will follow the
	operation of the button concerned.
	Ach:
	The ATW function is activated when the
	WHITE BAL switch has been set to the A
	position.
	Bch:
	The ATW function is activated when the
	WHITE BAL switch has been set to the B
	position.
	PRE:
	The ATW function is activated when the
	WHITE BAL switch has been set to the
	PRST position.
HANDLE ZOOM	For setting the zoom speeds which are to
(Camera)	be allocated to the positions of the
	HANDLE ZOOM switch.
	L/OFF/H:
	LOW/OFF/HIGH are set to the 1/2/3
	positions. (At OFF, no zoom operations
	are performed.)
	L/M/H:
	LOW/MID/HIGH are set to the 1/2/3
	positions.
IRIS DIAL	For setting the rotational direction of the
(Camera)	IRIS dial and iris control (in the MANUAL
	IRIS mode).
	DOWN OPEN:
	The iris opens when the IRIS dial is
	turned downward.
	UP OPEN:
	The iris opens when the IRIS dial is
	turned upward.

The underlining indicates the factory setting.

Item/	Description of settings
(display mode)
USER1	For setting the operation of the function
(Camera)	allocated to the USER1 button.
	COLOUR BAR:
	The colour bar display is set to ON or OFF.
	SPOTLIGHT:
	The auto iris control for the spotlight is
	set to ON or OFF.
	BACKLIGHT:
	The auto iris control for backlight
	compensation is set to ON or OFF.
	BLACKFADE:
	When the button is held down, the whole
	image is faded out into black. The sound
	is also faded out at the same time.
	WHITEFADE:
	When the button is held down, the whole
	image is faded out into white. The sound
	is also faded out at the same time.
	MODECHECK:
	When the button is pressed, the camera
	status currently set is displayed in the
	viewfinder and on the LCD monitor
	where it can be checked.
	ATW:
	The operation of the ATW function is set
	to ON or OFF.
	ATWLOCK:
	When the button is pressed, the white
	balance value is fixed; when it is pressed
	again, the operation of the ATW function
	is performed.
	GAIN:18 dB:
	When this button is pressed, the gain is
	set to 18 dB.
	O The picture may be temporarily
	disturbed when the gain has been
	switched to 18 dB or from 18 dB to
	another value.
	INDEX:
	When the button is pressed during
	shooting or recording, an index signal is
	recorded on the tape. If it is pressed while
	shooting or recording is temporarily
	stopped, the index signal recording
	standby mode is established. When
	shooting or recording is commenced from
	this mode, the index signal will be recorded
	on the tape. Recording index signals
	enables index searches to be performed
	during playback. (See page 62)
	SLOWSHUT:
	When the button is pressed, the slow
	shutter mode is established. Each time
	it is pressed, the mode is turned ON or
	OFF alternatively.
USER2	For setting the operation of the function to
(Camera)	be allocated to the USER2 button.
	The settings are the same as for the ones
	for the USER1 items.
	BACKLIGHT
USER3	For setting the operation of the function to
(Camera)	be allocated to the USER3 button.
	The settings are the same as for the ones
	for the USER1 items.
	INDEX

42 (E)