Panasonic AG-DVX100A Tcg, VCR Free RUN, Rec Run, VCR Regen, TC Preset, UB Mode, VCR User

Setting menus

RECORDING SETUP screen

Item/	Description of settings
(display mode)
1394 TC REGEN	For selecting the time code to be recorded
(VCR)	when recording the signals of a component
	connected to the DV connector.
	OFF:
	The signals are recorded using the time
	code which was set using the TC MODE
	item, TCG item and FIRST REC TC
	item.
	ON:
	The signals are recorded using the time
	code of the signals which have been
	input to the DV connector.
	O When ON has been selected as this
	item’s setting, this setting takes
	precedence over the TC MODE item,
	TCG item and FIRST REC TC item
	settings.
	O When no signals are supplied to the DV
	connector, the TC MODE item, TCG item
	and FIRST REC TC item settings are
	followed.
TCG	For setting the operation mode in which the
(Camera)	internal time code generator is to be run.
(VCR)	FREE RUN:
	The internal time code generator is run
	regardless of the operation mode.
	REC RUN:
	The internal time code generator is run
	during recording.
FIRST REC TC	For selecting the time code which is to be
(Camera)	recorded when recording is started.
(VCR)	REGEN:
	Recording proceeds in such a way that
	the time code continues on (is
	regenerated) from the time code on the
	tape.
	PRESET:
	The time code is not regenerated from
	the time code on the tape.
	The time code is recorded using the
	value set in the TC PRESET item
	serving as the initial value.
	However, the time code is forcibly
	regenerated when shooting with frame-
	to-frame continuity has been performed.
TC PRESET	For setting the initial value of the time code
(Camera)	to be recorded.
(VCR)	This item’s setting is valid when PRESET
	has been selected as the setting for the
	FIRST REC TC item.
	O When the progressive mode has been
	set to 24P or 24P (ADV), set the frame
	value to 0 or to a multiple of 5. If any
	other value is set, the time code
	recorded will shift.

Item/			Description of settings
(display mode)
1394 UB REGEN	For selecting the user’s bit to be recorded
(VCR)	when recording the signals of the
	component connected to the DV connector.
	OFF:
		The user’s bit selected for the UB MODE
		item is used for the recording.
	ON:
		The user’s bit of the signals input to the
		DV connector is used for the recording.
	O When ON has been selected as this item’s
		setting, this setting takes precedence over
		the UB MODE item setting.
	O The user’s bit is not recorded if the
		signals do not contain the user’s bit
		information.
	O When no signals are supplied to the DV
		connector, the UB MODE item setting is
		followed.
UB MODE	For setting what is to be recorded as the
(Camera)	user’s bit.
(VCR)	USER:
		The user’s information is recorded.
	TIME:
		The time of the recording is recorded.
	22 22 22 00
			Hours
			Minutes				Seconds
	DATE:
		The date of the recording is recorded.
	22 22 22 22
			Year				Hours
			Month				Day
	TCG:
		The time code generator’s value is
		recorded.
	FRM. RATE:
		The frame rate information for frame
		conversion is recorded.
		22 0F 22 22
					Recording control
					information
					O Updated frame information
					O REC START/STOP
						information
				Frame rate information
				O Frame rate (50 or 25)
				O I/P identification information
				O Frame rate coefficient
		User’s bit value verification
		information
UB PRESET	For setting the user’s bit. However, USER
(Camera)	must be selected for the UB MODE item
(VCR)	setting.

ENGLISH

The underlining indicates the factory setting.

45 (E)