Panasonic AG-DVX100A manual Setting the time data, Setting the user’s bit

Setting the time data

Setting the user’s bit

By setting the user’s bit, memos (dates, times) and other information consisting of up to 8 digits in hexadecimal notation can be recorded on the sub-code track. The user’s bit settings are automatically stored in the memory and retained even after the power has been turned off.

1 Set the camera recorder’s POWER switch to ON.

2 Select USER as the setting for the UB MODE item on the setting menu RECORDING SETUP screen.

OFor details on the menu operations, refer to page 38.

RECORDING SETUP

:
TCG			H FREE RUN
FIRST REC TC			H PRESET
TC PRESET			H ––––
	UB MODE		H USER TIME
		DATE	TCG FRM.RATE
UB PRESET			H ––––
;
		PUSH MENU TO RETURN

3 Tilt the OPERATION lever in the 4 direction

and move to the UB PRESET item.
		RECORDING SETUP
:
TCG			H FREE RUN
FIRST REC TC			H PRESET
TC PRESET			H ––––
UB MODE			H USER
			H –––– YES
	UB PRESET
	;
		PUSH MENU TO RETURN

4 Press “;” of the OPERATION lever, and move “1” to YES.

RECORDING SETUP

:
TCG		H FREE RUN
FIRST REC TC		H PRESET
TC PRESET		H ––––
UB MODE		H USER
		–––– HYES
	UB PRESET
	;

PUSH MENU TO RETURN

5 The screen shown below appears. Set the user’s bit using the OPERATION lever.

Tilt the OPERATION lever in the 3 or 4 direction, select the user’s bit characters, press “;” of the OPERATION lever, and move to the next digit.

OThe numbers 0 to 9 and letters A to F can be used as the user’s bit characters.

OWhen the COUNTER RESET button is pressed on the screen shown below, the user’s bit is reset to zero.

UB PRESET

00 0 0 0 0 0 0

+ :PUSH PLAY

–:PUSH STOP SEL:PUSH STILL

PUSH MENU TO RETURN

6 Upon completion of the user’s bit setting, press the MENU button. The screen shown below appears. Tilt the OPERATION lever in the 4 direction, select YES, and press “;” of the OPERATION lever.

UB PRESET

PRESET OK?

NO –––. PUSH STILL

YES

7 Press the MENU button twice to release the menu mode.

ENGLISH

33 (E)