Setting menus
PLAYBACK FUNCTIONS screen
Item/ | Description of settings | |
(display mode) | ||
| ||
|
| |
|
| |
AUDIO OUT | For setting the audio signals to be output | |
(VCR) | from the AUDIO IN/OUT connectors (pin | |
| jacks) when a tape is played back. | |
| CH1•CH2: | |
| CH1 connector = CH1 signals | |
| CH2 connector = CH2 signals | |
| CH1: | |
| CH1 connector = CH1 signals | |
| CH2 connector = CH1 signals | |
| CH2: | |
| CH1 connector = CH2 signals | |
| CH2 connector = CH2 signals | |
|
|
Inputs and audio tracks recorded
Input | When shooting | When audio dubbing | |
|
| ||
|
|
| |
|
|
| |
Internal | CH1 | CH3 | |
microphone L | |||
|
| ||
|
|
| |
Internal | CH2 | CH4 | |
microphone R | |||
|
| ||
|
|
| |
INPUT 1 (XLR) | CH1 | CH3 | |
|
|
| |
INPUT 2 (XLR) | CH2 (CH1) | CH4 (CH3) | |
|
|
| |
AUDIO IN/OUT | __ | CH3 | |
CH1 (pin jack) | |||
|
| ||
|
|
| |
AUDIO IN/OUT | __ | CH4 | |
CH2 (pin jack) | |||
|
| ||
|
|
|
RECORDING SETUP screen
Item/ |
|
| Description of settings | |
(display mode) |
|
| ||
|
|
|
| |
|
| |||
|
| |||
REC SPEED | For selecting the recording time mode. | |||
(Camera) | SP : SP (standard play) mode | |||
(VCR) | LP : LP (long play) mode | |||
|
| |||
AUDIO REC | For selecting the system for converting the | |||
(Camera) | recording to PCM audio. | |||
(VCR) | 32K (12 bit) | : | ||
| 48K (16 bit) | : | ||
|
| |||
MIC ALC | For setting the mic level automatic control | |||
(Camera) | function to ON or OFF. |
| ||
| OFF | ON |
| |
| Audio distortion caused by excessively high | |||
| input level can be minimized by selecting | |||
| ON for this item. |
| ||
| O The recording level of the audio signals | |||
| must be adjusted using the AUDIO | |||
| controls, irrespective of this setting. | |||
|
| |||
MIC GAIN 1 | For setting the input level of the external | |||
(Camera) | microphone which is connected to the | |||
| INPUT 1 connector. |
| ||
|
| |||
|
| |||
MIC GAIN 2 | For setting the input level of the external | |||
(Camera) | microphone which is connected to the | |||
| INPUT 2 connector. |
| ||
|
| |||
|
|
|
|
|
The audio tracks on which signals are to be recorded during shooting can be changed using the CH1 SELECT switch and CH2 SELECT switch.
The audio tracks on which signals are to be recorded during audio dubbing can be changed using the A DUB INPUT item on the AV IN/OUT SETUP screen.
32K
Audio recording | 32K | AUDIO OUT | AUDIO IN/OUT | AUDIO IN/OUT |
mode | item setting | item setting | CH1 output | CH2 output |
|
|
|
|
|
|
|
|
|
|
|
| CH1•CH2 | CH1 | CH2 |
| ST1 | CH1 | CH1 | CH1 |
|
| CH2 | CH2 | CH2 |
32K (12 bit) |
|
|
|
|
| CH1•CH2 | CH3 | CH4 | |
| ST2 | CH1 | CH3 | CH3 |
|
| CH2 | CH4 | CH4 |
|
|
|
|
|
| MIX | __ | CH1+CH3 | CH2+CH4 |
|
|
|
|
|
|
| CH1•CH2 | CH1 | CH2 |
48K (16 bit) | __ | CH1 | CH1 | CH1 |
|
| CH2 | CH2 | CH2 |
|
|
|
|
|
The underlining indicates the factory setting.
44 (E)
