Panasonic AG-DVX100A manual AV IN/OUT Setup screen, REC Time, DUB Input, Dv Out

Setting menus

RECORDING SETUP screen

Item/			Description of settings
(display mode)
INTERVAL REC	For setting the intermittent recording mode.
(Camera)	OFF: Intermittent recording is not performed.
	ON: When the START/STOP button is
	pressed, intermittent recording is
	performed with the cycle set by the REC
	TIME item and INTERVAL TIME item.
	ONE-SHOT:The time lapse shooting mode is
	established.
	When the START/STOP button is
	pressed, recording is performed for the
	number of seconds set by the REC TIME
	item, after which the recording pause
	mode is established.
	O When intermittent recording is set to ON or
	ONE-SHOT, “I –” flashes on the left of the
	VCR operation mode. When recording is
	started, it stops flashing and lights.
	O Even when intermittent recording is set to
	ON or ONE-SHOT, the intermittent
	recording mode returns to OFF when the
	power is turned off.
REC TIME	For setting the recording duration for which
(Camera)	intermittent recording is to be performed.
	0.5s	:	0.5 sec.	1s	:	1.0 sec.
	1.5s	:	1.5 sec.	2s	:	2.0 sec.
INTERVAL TIME	For setting the duration of the interval time
(Camera)	with which intermittent recording is to be
	performed.
	15s	:	15 sec.	30s	:	30 sec.
	1m	:	1 min.	5m	:	5 min.
	10m :		10 min.

The underlining indicates the factory setting.

AV IN/OUT SETUP screen

Item/		Description of settings
(display mode)
A DUB INPUT	For selecting the sound which is to be
(VCR)	recorded when audio dubbing is performed.
	MIC: The sound from the internal microphone
	or the sound from the external
	components connected to the INPUT 1
	and 2 connectors is recorded. (The
	sound is selected using the CH1 SELECT
	switch and CH2 SELECT switch.)
	A_IN: The sound of the audio component
	connected to the AUDIO IN/OUT
	connectors (pin jacks) is recorded.
	<Note>
	If audio dubbing is performed when the
	sound has been recorded in the 16-bit
	audio mode, the sound will be recorded
	over the sound heard during shooting.
DV OUT	For setting the function, which converts the
(VCR)	analogue signals which have been input
	into digital signals and outputs them from
	the DV connector, to ON or OFF.
	OFF	ON

46 (E)