2-3. AV disk inspections
In this section, the AV disks are inspected using the
These inspections check for defects in the AV disks as recording media. (It takes about 2 hours to conduct all the inspections in this category.)
1.To return the screen display to the inspection menu selection, press the [Esc] key several times until the message box shown below is displayed.
Exit Utility ?
Yes
No
2.After selecting [No], press the [Enter] key, follow the displays and return the device channel (channel A, B) selection screen.
3.Inspect the disks following the instructions on “(3) Inspecting the disk media” in
Channel A SCSI disk checks
<Check> | ) Did “Verify Disk” of the SCSI ID #1 disk end with “Disk Verification |
| Complete”? |
) Did “Verify Disk” of the SCSI ID #2 disk end with “Disk Verification
Complete”?
Channel B SCSI disk checks
<Check> | ) Did “Verify Disk” of the SCSI ID #0 disk end with “Disk Verification |
| Complete”? |
) Did “Verify Disk” of the SCSI ID #1 disk end with “Disk Verification
Complete”?
) Did “Verify Disk” of the SCSI ID #2 disk end with “Disk Verification
Complete”?
4.If all the disks have been inspected with no errors found, refer to
– 12 –