The figure below shows the device list screen which appears after the SCSI device display. The PCI device list occupies the bottom half of the screen. The PCI device list appears only for a short while at the unit’s startup stage. Check that the list is displayed and that the Device Class and IRQ sections are displayed.
|
|
|
|
|
|
|
| CPU Clock |
| : 850MHz | Cache Memory | : 512K |
|
|
|
|
|
|
| |
| Diskette Drive A | : 1.44M, 3.5 in. | Display Type | : EGA/VGA |
| |
| Diskette Drive B | : None | Serial Port(s) | : 3FB 2FB |
| |
| Pri. Master | Disk | : 20576MB, UDMA2 | DRAM TYPE | : SDRAM |
|
| Pri. Slave | Disk | : | SPD On Module(s) | : Yes |
|
| Sec. Master | Disk | : None | Data Integrity | : |
|
| Sec. Slave | Disk | : None |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<BIOS:> BIOS update data incorrect (CPUID=00000619), Update not loaded.
PCI device listing..... |
|
|
|
| ||
Bus No. Device No. Func No. Vender ID | Device ID | Device Class | IRQ | |||
|
|
|
|
|
|
|
0 | 4 | 1 | 8086 | 7111 | IDE Controller | 14/15 |
0 | 4 | 2 | 8086 | 7112 | Serial bus controller | 9 |
0 | 11 | 0 | 9005 | 00C0 | Mass storage controller 10 | |
0 | 11 | 1 | 9005 | 00C0 | Mass storage controller 5 | |
1 | 0 | 0 | 102B | 0525 | Display controller | 11 |
2 | 2 | 0 | 123F | 8120 | Multimedia device | 10 |
2 | 3 | 0 | 1131 | 5400 | Multimedia device | 5 |
2 | 4 | 0 | 1131 | 5400 | Multimedia device | 9 |
3 | 1 | 0 | 1131 | 5400 | Multimedia device | 11 |
3 | 2 | 0 | 123F | 8120 | Multimedia device | 10 |
3 | 5 | 0 | 102B | 8010 | Processors | NA |
It must be checked that Device Class and IRQ are displayed.
– 38 –