B-3. How to use SCSI-BIOS Tool
(1)Checking the SCSI device configuration
1.Press the [:] or [;] arrow key to highlight the SCSI channel to be checked, and then press the [Enter] key to select the channel.
(Press the [Esc] key to return to the previous menu.)
2.The selection screen shown below now appears. Press the [:] or [;] arrow key to highlight the [Configure/View Host Adapter Settings] item, and press the [Enter] key.
(Press the [Esc] key to return to the previous menu.)
Options
Configure/View Host Adapter Settings
SCSI Disk Utilities
3.The selection screen shown below now appears. Press the [:] or [;] arrow key to highlight the [SCSI Device Configuration] item, and press the [Enter] key.
(Press the [Esc] key to return to the previous menu.)
| Configuration |
|
|
|
|
|
|
| |
| SCSI Channel Interface Definitions |
|
| |
| Host Adapter SCSI ID................. | 7 |
| |
| SCSI Parity | Checking................. | Enable |
|
| Host Adapter SCSI Termination........ | Automatic |
| |
| Additional Options |
|
| |
| Boot Device | Options.................. | Press<Enter> |
|
|
|
|
|
|
| SCSI Device | Configuration............ | Press<Enter> |
|
| .......Advanced Configuration Options | Press<Enter> |
| |
|
|
|
|
|
4.The parameters for SCSI devices #0 to #15 now appear. Check that the parameters of all the devices are set as shown below.
(Press the [Esc] key to return to the previous menu.)
|
|
| SCSI Device Configuration |
|
|
|
| |||
|
|
|
|
|
|
| ||||
|
| SCSI Device ID |
|
|
|
|
| #15 |
|
|
|
|
| #0 | #1 |
|
| ||||
|
|
|
|
|
|
|
|
| ||
|
| Sync Transfer Rate(MB/sec).... | 160 | 160 | 160 |
|
| |||
|
| Initiate Wide Negotiation..... | yes | yes | yes | |||||
|
| Enable Disconnection.......... | yes | yes | yes | |||||
|
| Send Start Unit Command....... | yes | yes | yes | |||||
Options Listed Below Have NO EFFECT if the BIOS is Disabled
Enable Write Back | Cache....... | N/C | N/C | N/C | |
BIOS Multiple LUN | Support..... | no | no | no | |
Include in BIOS Scan.......... | yes | yes | yes | ||
– 40 –