<Check>

) Did the sequence editor screen appear when the button was clicked?

2.When the sequence editor has started, drag and drop the clips registered in the bin onto the video track, and create the video sequence.

The length of the dropped clip is indicated by a proportionately long rectangle, and the clip icon appears at the far left of the rectangle. The figure below shows an example of the display.

<Check>

) Was it possible to drag and drop the clip on the video track?

3.In the same way, drag and drop several clips on the video track and create the video sequence.

The clips on the video tracks are automatically color-coded.

When a clip extends beyond the sequence editor screen, click the “+” or “–” button at the top of the window to change the time axis. The displayed length of a clip can be shortened using the “–” button.

A video sequence created by only drag and drop procedures is automatically set to the cut editing mode.

The clips are automatically positioned without gaps, and the mark appears at each join.

– 25 –