1-4. Connecting the peripheral devices and layout precautions
| Bear in mind the points listed below when connecting the computer monitor, |
| monitor (Video) for monitoring the pictures and other peripheral devices to |
| the unit. It is recommended that you proceed while referring to the rear panel |
| connection diagrams in the Operating Instructions. (Refer to pages |
<Check> | Operating Instructions.) |
| For details on the handling of peripheral devices, refer to the operating |
| instructions accompanying each device concerned. |
) Connect the peripheral devices while power to the unit and peripheral devices is off.
) Before moving the unit, turn its power off.
Do not move the unit while the power is still on.
) Install the unit in a flat and stable location.
) At the installation stage, ensure that the connectors and cables protruding from the unit’s rear panel do not make contact with any objects in the vicinity.
) At the installation stage, do not drop the keyboard or mouse, and take care not to run their cables underneath the unit or peripheral devices.
) Do not place objects on top of the unit.
) Leave a sufficient clearance around the unit in order to improve the ventilation inside the unit.
) Do not place food or drinks in the vicinity of the unit.
Morsels of food or spilled drinks can cause trouble.
) Check that you have not forgotten to connect the VGA cable between the unit and the monitor for the computer.
) Check that you have not forgotten to connect the video cable between the unit and monitor (Video) for monitoring the pictures.
) Check that you have not forgotten to connect the unit and any other peripheral devices.
) Check that all the devices required have been connected, and insert the power plugs of the unit and peripheral devices into the power outlets.
) When the SCSI hard disk drive for external expansion purposes is to be connected:
Attach one of the ferrite cores packed with the unit to one end of the SCSI I/F cable and the attach the other one to the other end.
– 7 –