(4) SCSI card name and (5) SCSI disk drive names (for 5 units)

The figure below shows the screen which displays the BIOS installation of the SCSI card (ASC-39160) inserted into the PCI slot and the information for the five SCSI disk drives connected to the SCSI card.

Normally, information for all five drives is displayed as shown in the figure.

Initialize Plug and Play Cards...

PNP Init Completed

Detecting Primary Master.... IBM-DTLA-307030

Detecting Primary Slave..... MATSHITA CR-585

The SCSI card name must include “39160”.

Adaptec SCSI Card 39160 SCSI BIOS vX.XX

(c) 1997 Adaptec, Inc. All Rights Reserved.

222Press <Ctrl><A> for SCSISelect(TM) Utility! 111

Ch A,

SCSI ID: 1 IBM

DDYS-T18350M

160

- Hard Disk0

 

SCSI ID: 2

IBM

DDYS-T18350M

160

- Hard Disk1

Ch B,

SCSI ID: 0

IBM

DDYS-T18350M

160

- Hard Disk2

 

SCSI ID: 1

IBM

DDYS-T18350M

160

- Hard Disk3

 

SCSI ID: 2

IBM

DDYS-T18350M

160

- Hard Disk4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“160” must appear as the

 

 

 

 

 

 

SCSI bus speed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The disk drive names must appear for each SCSI

 

 

 

 

ID without fail.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The SCSI ID for Ch A and Ch B must appear in order as 1 and 2 and 0 to 2, respectively.

The SCSI channels must appear as Ch A and Ch B.

Two disc drive displays must appear for Ch A and three for Ch B.

– 37 –