¬ When the SCSI device parameters are wrong ¬

O Change the parameters.

To change a parameter, press the [:] or [;] arrow key to highlight the item to be changed.

Next, press the [Enter] key. A pop-up menu will appear, and the selectable settings are displayed.

Highlight the item to be selected, and press the [Enter] key to make the selection.

(2)Checking the SCSI IDs

1.Press the [:] or [;] arrow key to highlight the SCSI channel to be checked, and press the [Enter] key to make the selection.

(Press the [Esc] key to return to the previous menu.)

2.The selection screen shown below now appears. Press the [:] or [;] arrow key to highlight the [SCSI Disk Utilities] item, and press the [Enter] key.

(Press the [Esc] key to return to the previous menu.)

Options

Configure/View Host Adapter Settings

SCSI Disk Utilities

3.Check that the screen shown below now appears. (Press the [Esc] key to return to the previous menu.)

 

Select SCSI Disk and press <Enter>

 

 

 

 

 

 

 

SCSI ID #0 :

No Device

 

 

 

The figure on the left

SCSI ID #1 :

IBM

DDYS-T18350M

 

 

shows the information for

SCSI ID #2 :

IBM

DDYS-T18350M

 

channel A.

SCSI ID #3 :

No device

 

With channel B, IBM

 

DDYS-T18350M is

SCSI ID #4 :

No device

 

 

displayed for #0 as well.

SCSI ID #5 : No device

 

 

 

 

 

SCSI ID #6 : No device

 

 

SCSI ID #7 :

Adaptec

SCSI Card 39160

 

 

SCSI ID #8 : No device

 

 

SCSI ID #9 : No device

 

 

SCSI ID #10 : No device

 

 

SCSI ID #11 : No device

 

 

SCSI ID #12 : No device

 

 

SCSI ID #13 : No device

 

 

SCSI ID #14 : No device

 

 

SCSI ID #15 : No device

 

 

 

 

 

 

 

 

 

¬ When there are not enough devices ¬

O Check that the power supply has been connected to the SCSI HDD. O Check that the SCSI cable has been connected properly.

O Check the SCSI ID settings.

– 41 –