(3)Inspecting the disk media

1.Press the [:] or [;] arrow key to highlight the SCSI channel to be checked, and press the [Enter] key to make the selection.

(Press the [Esc] key to return to the previous menu.)

2.The selection screen shown below now appears. Press the [:] or [;] arrow key to highlight the [SCSI Disk Utilities] item, and press the [Enter] key.

(Press the [Esc] key to return to the previous menu.)

Options

Configure/View Host Adapter Settings

SCSI Disk Utilities

3.The window shown below now appears. Press the [:] or [;] arrow key to highlight the SCSI disk (ID #0 to 2) to be inspected, and press the [Enter] key.

(Press the [Esc] key to return to the previous menu.)

Select SCSI Disk and press <Enter> SCSI ID #0 : No Device

SCSI ID #1 : IBM DDYS-T18350M

SCSI ID #2 : IBM DDYS-T18350M

SCSI ID #3 : No device

SCSI ID #4 : No device

SCSI ID #5 : No device

SCSI ID #6 : No device

SCSI ID #7 : Adaptec SCSI Card 39160

SCSI ID #8 : No device

SCSI ID #9 : No device

SCSI ID #10 : No device

SCSI ID #11 : No device

SCSI ID #12 : No device

SCSI ID #13 : No device

SCSI ID #14 : No device

SCSI ID #15 : No device

The figure on the left shows the information for channel A.

With channel B, IBM DDYS-T18350M is displayed for #0 as well.

4.The selection screen shown below now appears. Press the [:] or [;] arrow key to highlight the [Verify Disk Media] item, and press the [Enter] key.

(Press the [Esc] key to return to the previous menu.)

Format Disk

Verify Disk Media

5.The [Verify Disk?] message now appears. Select [Yes] to start the disk media check.

6.The progress made is indicated, and when the [Disk Verification Complete] message is displayed, press the [Esc] key.

– 42 –