4-3. Checking the downloading operation

In this section, the downloading operation using the limited edition of the editing software program is checked.

To check the downloading operation, use the clips which were already uploaded by the digitizer and registered in the bin. (Check that the clips used are free from noise and disturbances.)

Ensure that a cassette tape enabling test recording is already loaded in the system’s internal VTR.

<Note>

Clips must be used to check the downloading operation. If the video sequence used in section 4-2 is downloaded, it will not be recorded properly on the tape.

Use the Record To Video tool to check the downloading operation.

1.Click the button from Toolbox to start the Record To Video tool.

When Record To Video tool is started, the screen shown below appears.

– 30 –