Superimpose screen
The control signals, time code, etc. are displayed on this screen using abbreviations.
TV monitor
TCR 22 :22 :22 :22
Abbreviations
CTL: Control signal count value
TCR: Time code data recorded in the SBC area
TCR.: Time code data recorded in the VAUX area
UBR: User’s bit data recorded in the SBC area
UBR.: User’s bit data recorded in the VAUX area
TCG: Time code data of the time code generator
UBG: User’s bit data of the time code generator
<Note>
[T2R], [T2R.], [U2R] or [U2R.] is displayed when the data has not been read correctly from the tape.
Characters displayed |
|
| |
The | background of the characters superimposed on |
|
|
the | display screen can be changed using | (C |
|
F5 | |||
TYPE) on the <TC SHIFT> menu.
Display position |
|
|
The position of the characters superimposed on the |
| |
display can be changed using | (C HPOS) andF2 | F3 |
(C VPOS) on the <TC SHIFT> menu and the ADJ dial.
TCR 22 :22 :22 :22
TCR 22 :22 :22 :22
TV monitor | TV monitor |
Operation mode
The VTR’s operation mode can also be displayed using F4(DISPLY) on the <TC SHIFT> menu.
TCR | 22 :22 :22 :22 |
|
| |
STOP |
|
|
| VTR operation mode |
|
|
| ||
| TV monitor | |||
TCR 22 :22 :22 :22 | T C R 22 : 22 : 22 : 22 |
TV monitor | TV monitor |
<Note>
When the 23/24 Hz mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting, the time code and other information superimposed on
the MONITOR and VIDEO OUT3 connectors are not displayed.
113
