Setup menus

<BASIC>

(continued)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No./Item

 

 

 

 

Description of setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

022

For selecting the format in which the tape is

 

 

to be played back.

 

 

 

 

 

 

PB FORMAT

0000

MANU

:

 

 

 

 

 

 

 

The format is determined by the setting selected for

 

 

 

setup menu item No.023 (FORMAT SEL).

 

 

 

 

0001

 

AUTO

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The tape is played back in the format in which it was

 

 

 

recorded.

 

 

 

 

 

 

 

 

 

023

For selecting the format when “MANUAL” has

 

 

been selected as the setup menu item No.022

 

FORMAT

(PB FORMAT) setting.

 

 

 

 

 

SEL

If “AUTO” is selected as the setting, the format when

 

 

playback

starts is selected, and when the tape is

 

 

played back, the format is automatically detected and

 

 

matched with the format of the playback tape.

 

 

 

0000

HD-LP

:

The DVCPRO HD-LP format is

 

 

 

 

 

 

 

selected, and the setup menu

 

 

 

 

 

 

 

 

item

No.020 (SYS

FORMAT)

 

 

 

 

 

 

 

setting is followed.

 

 

 

0001

HD-SP

:

The DVCPRO HD format is

 

 

 

 

 

 

 

selected, and the setup menu

 

 

 

 

 

 

 

 

item

No.020 (SYS

FORMAT)

 

 

 

 

 

 

 

setting is followed.

 

 

 

0002

422 :

The DVCPRO50 (422) format is

 

 

 

 

 

 

 

selected.

 

 

 

 

0003

411 :

The DVCPRO (411) format is

 

 

 

 

 

 

 

selected.

 

 

 

 

0004

 

420p

:

The

DVCPROP (420p) format

 

 

 

 

 

 

 

is selected.

 

 

 

0005

 

 

DV

:

The DV format is selected.

 

 

0006

DVCAM

:

The DVCAM format is selected.

 

 

 

 

 

 

030* 3

 

0000

59/23:

The 59.94/23.98 Hz frequency is set.

 

0001

60/24 :

The 60/24 Hz frequency is set.

 

HD

However, the field

frequency set

here is used

 

FREQUENCY

only when there

is

no

input

signal

which

 

 

corresponds to the OUT REF setting. If there is a

 

 

corresponding input signal, the field frequency is

 

 

matched with that of the input signal.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Video output reference

 

 

 

 

 

031*

 

 

 

 

 

 

0000

 

AUTO

:

When the HD REF input signal is

OUT REF

 

 

 

 

 

 

supplied, it is used as the reference.

If

 

 

 

 

 

 

 

it is not supplied but the SD REF input

 

 

 

 

 

 

 

signal is supplied, the SD REF signal

 

 

 

 

 

 

 

serves as the reference instead.

 

 

 

 

 

 

 

 

If neither the HD REF nor SD REF input

 

 

 

 

 

 

 

signal is supplied, the HD serial signal

 

 

 

 

 

 

 

serves as the reference.

 

 

 

 

 

 

 

 

 

If none of the HD REF, SD REF and

 

 

 

 

 

 

 

HD

serial

signals are

supplied,

the

 

 

 

 

 

 

 

internal sync signal serves as the

 

0001

INPUT

:

reference.

 

 

 

 

When the serial input signal is supplied,

 

 

 

 

 

 

 

it is used as the reference

 

.

 

0002

HD_REF

:

The signal which is input to the HD REF

 

 

 

 

 

 

 

IN connector is used as the reference.

 

 

0003

SD_REF

:

The signal which is input to the SD REF

 

 

 

 

 

 

 

IN connector is used as the reference.

 

 

<Note>

 

 

 

 

 

 

 

If the 1 (INPUT) setting is selected when the 25 Hz (HD)

 

 

mode has been selected as the system menu item

 

 

 

No.25

(SYSTEM FREQ) setting, the system will

 

 

construe this to mean that the 0 (AUTO) setting has

 

 

been selected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Formats in which the tape is played back

022:

020:

023:

 

PB

SYS

FORMAT

Playback format

FORMAT

FORMAT

SEL

 

 

 

 

 

 

 

 

 

 

 

HD_LP

DVCPRO HD-LP(1080i)

 

 

 

 

 

 

HD_SP

DVCPRO HD(1080i)

 

 

 

 

 

 

422

DVCPRO50(422)

 

 

 

 

 

1080i

411

DVCPRO(411)

 

 

 

 

 

 

420p

DVCPROP(420p)

 

 

 

 

 

 

DV

DV

 

 

 

 

MANUAL

 

DVCAM

DVCAM

 

 

 

 

HD_LP

DVCPRO HD-LP(720p)

 

 

 

 

 

 

 

 

HD_SP

DVCPRO HD(720p)

 

 

 

 

 

 

422

DVCPRO50(422)

 

 

 

 

 

720p

411

DVCPRO(411)

 

 

 

 

 

 

420p

DVCPROP(420p)

 

 

 

 

 

 

DV

DV

 

 

 

 

 

 

DVCAM

DVCAM

 

 

 

 

 

 

 

DVCPRO HD-LP(1080i)/

 

 

 

DVCPRO HD(1080i)/

 

 

 

DVCPRO HD-LP(720p)/

AUTO

--------

--------

DVCPRO HD(720p)/

DVCPRO50(422)/

 

 

 

 

 

 

DVCPRO(411)/

 

 

 

DVCPROP(420p)/DV/

 

 

 

DVCAM, automatic detection

 

 

 

 

<Notes>

In the EJECT mode, the format selected by the setup menu item No.020 (SYS FORMAT) setting applies.

If “AUTO” has been selected as the setup menu item No.022 (PB FORMAT) setting, the setup menu item No.023 (FORMAT SEL) setting is used as the format when the format is not detected (when the tape has just been inserted).

However, when “DV” or “DVCAM” has been selected, the VTR operation will be as if “HD-LP” has been selected.

*3: This item is not displayed when the 50 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

*4: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

The underlining (__) denotes the factory setting mode.

83

Page 83
Image 83
Panasonic AJ-HD1700 manual PB Format, Frequency, Out Ref, Hdref